| Hardware Specifications | |
|---|---|
| Form factor | 1U |
| Switching bandwidth (data rate, full duplex) | 1.8 Tbps |
| Forwarding capacity (data rate, full duplex) | (L2) 1.2 Bpps, (L3) 600 Mpps line-rate performance |
| Dimensions and weight | 44.0 cm, 17.3 in. (Width), 44.5 cm, 17.5 in. (Depth), 4.37cm, 1.72 in. (Height) 9.00 kg, 19.8 lb (Weight) |
| 25/10/1 GbE ports | 48 |
| 100/40 GbE ports | 6 |
| Power supplies | Two internal, redundant, field-replaceable, load-sharing AC or DC power supplies |
| Cooling fans | Five field-replaceable fan |
| Airflow | Rear-to-front or front-to-rear airflow |
| dynamically shared packet buffer | 24 MB |
| Power | |
| Power inlet (AC) | C13 |
| Input voltage | 90 V to 264 V or 40.8 V to 60 V DC |
| Input line frequency | 47 Hz to 63 Hz |
| Inrush current | 25 A peak |
| Maximum current | 12 A/AC, 14 A/DC |
| Typical power consumption | 182 W Two AC PSU, five fan trays, 10% traffic, low fan speed |
| Maximum power consumption | 489 W Two AC PSU, six fan trays, 100% traffic, high fan speed |
| Power supply rated maximum (AC) | 650 W |
| Switch power consumption | DC PSU 475 W, AC PSU 489 W |
| Environment | |
| Temperature | Operating: |
| -5°C to 50°C (front-to-back air flow) | |
| -5°C to 45°C (back-to-front air flow) | |
| Temporarily up to 55°C (six fan trays) | |
| Non-operating and storage: ?40°C to 70°C | |
| Humidity | 5% to 95% at 50°C |
| Altitude | Up to 3,000 m safety, 60 m to 4,000 m operational |
| Shock (operational) | 20 G, 11 ms, half-sine wave |
| Vibration (operational) | 1 G sine, 0.4 gms random, 5-500 Hz |
| Airflow | 134 CFM (estimated with two PSU, six fan trays) |
| Switch heat dissipation (25°C) | AC PSU 400 W |
| Acoustics (25°C) | 52 dBA |
| MTBF (25°C) | 324,414 hours |
| Software Specifications | |
| Connector Options | 10/1 GbE SFP+ |
| 40 GbE QSFP+ | |
| 25 GbE SFP-28 | |
| 100 GbE QSFP-28 | |
| Out-of-band Ethernet management: 10/100/1000 Mbps RJ-45 | |
| Console management: RJ45 serial port and USB type-C port with serial communication device class support | |
| Storage: USB port, standard-A plug | |
| Maximum MAC addresses | Up to 96,000 |
| Maximum VLANs | 4,096 |
| Maximum routes (in hardware) | Up to 80,000 |
| Maximum ACLs | 2,000 |
| Maximum members in a standard LAG | 36 |
| Maximum per-port priority pause level | 8 |
| Maximum switches an mLAG can span | 2 |
| Maximum IPv4 unicast routes | 48,000 |
| Maximum IPv6 unicast routes | 8,000 |
| DCB priority flow control classes | 8 |
| Maximum jumbo frame size | 10,000 bytes |
| QoS priority queues (per port) | 8 |
| Virtualization Support | |
| VXLAN Routing | |
| VXLAN Bridging | |
| VXLAN Tunnel End Point | |
| VXLAN Multi-VNI | |
| Layer 2 Switching | |
| Conversational MAC Learning | |
| Virtual Link Aggregation Group (vLAG) spanning | |
| Layer 2 Access Control Lists (ACLs) | |
| Address Resolution Protocol (ARP) RFC 826 | |
| Layer 2 Loop prevention in an overlay environment | |
| MLD Snooping | |
| IGMP v1/v2 Snooping | |
| MAC Learning and Aging | |
| Link Aggregation Control Protocol (LACP) IEEE 802.3ad/802.1AX | |
| Virtual Local Area Networks (VLANs) | |
| VLAN Encapsulation 802.1Q | |
| Per-VLAN Spanning Tree (PVST+/PVRST+) | |
| Rapid Spanning Tree Protocol (RSTP) 802.1w | |
| Multiple Spanning Tree Protocol (MSTP) 802.1s | |
| STP PortFast, BPDU Guard, BPDU Filter | |
| STP Root Guard | |
| Pause Frames 802.3x | |
| Static MAC Configuration | |
| Multi-Chassis Trunking (MCT) | |
| Layer 3 Routing | |
| Border Gateway Protocol (BGP4+) | |
| DHCP Helper | |
| Layer 3 ACLs | |
| IGMPv2 | |
| OSPF v2/v3 | |
| Static routes | |
| IPv4/v6 ACL | |
| Bidirectional Forwarding Detection (BFD) | |
| 64-Way ECMP | |
| VRF Lite | |
| VRF-aware OSPF, BGP, VRRP, static routes | |
| VRRP v2 and v3 | |
| IPv4/IPv6 dual stack | |
| ICMPv6 Route-Advertisement Guard | |
| Route Policies | |
| IPv6 ACL packet filtering | |
| BGP Additional-Path | |
| BGP-Allow AS | |
| BGP Generalized TTL Security Mechanism (GTSM) | |
| BGP Peer Auto Shutdown | |
| IPv6 routing | |
| OSPF Type-3 LSA Filter | |
| Wire-speed routing for IPv4 and IPv6 using any routing protocol | |
| BGP-EVPN Control Plane Signaling RFC 7432 | |
| BGP-EVPN VXLAN Standard-based Overlay | |
| Multi-VRF | |
| IP Unnumbered Interface | |
| VRRP-E | |
| Automation and Programmability | |
| gRPC Streaming protocol and API | |
| REST API with YANG data model | |
| Python | |
| PyNOS libraries | |
| DHCP automatic provisioning | |
| NETCONF API | |
| High Availability | |
| BFD | |
| Quality of Service | |
| ACL-based QoS | |
| Two Lossless priority levels for QoS | |
| Class of Service (CoS) IEEE 802.1p | |
| DSCP Trust | |
| DSCP to Traffic Class Mutation | |
| DSCP to CoS Mutation | |
| DSCP to DSCP Mutation | |
| Random Early Discard | |
| Per-port QoS configuration | |
| ACL-based Rate Limit | |
| Dual-rate, three-color token bucket | |
| ACL-based remarking of CoS/DSCP/Precedence | |
| ACL-based sFlow | |
| Scheduling: Strict Priority (SP), Deficit Weighted Round-Robin (DWRR) Random Early Discard | |
| Management and Monitoring | |
| 1588v2 PTP | |
| Zero-Touch Provisioning (ZTP) | |
| IPv4/IPv6 management | |
| Industry-standard Command Line Interface (CLI) | |
| NETCONF API | |
| REST API with YANG data model | |
| SSH/SSHv2 | |
| Link Layer Discovery Protocol (LLDP) IEEE 802.1AB | |
| MIB II RFC 1213 MIB | |
| Syslog (RASlog, AuditLog) | |
| Management VRF | |
| Switched Port Analyzer (SPAN) | |
| Telnet | |
| SNMP v1, v2C, v3 | |
| sFlow version 5 | |
| Out-of-band management | |
| RMON-1, RMON-2 | |
| NTP | |
| Management Access Control Lists (ACLs) | |
| Role-Based Access Control (RBAC) | |
| Range CLI support | |
| Python | |
| DHCP Option 82 Insertion | |
| DHCP Relay | |
| Timestamping | |
| Security | |
| Port-based Network Access Control 802.1X | |
| RADIUS | |
| AAA | |
| TACACS+ | |
| Secure Shell (SSHv2) | |
| TLS 1.1, 1.2 | |
| HTTP/HTTPS | |
| BPDU Drop | |
| Lightweight Directory Access Protocol (LDAP) | |
| Secure Copy Protocol | |
| Control Plane Policing (CPP) | |
| LDAP/AD | |
| SFTP | |
| Port Security | |
Мы работаем на территории РФ и со странами ТС.
Доставка по Москве в пределах МКАД:
- Стоимость товара не менее 50 000 рублей - бесплатно
- Стоимость товара менее 50 000 рублей:
- До 10 кг – 300 рублей (пеший курьер)
- От 10 кг – 500 рублей
Доставка за пределы Москвы и в регионы:
Мы доставляем товар бесплатно до терминала транспортных компаний в Москве.
Так же можем отправлять товар курьерскими службами при условии заключенного между Вами и курьерской службой договора. Доставка за наш счет осуществляется по договоренности.
Доставка в страны ТС:
Доставка осуществляется ТК Деловые Линии.
Мы работаем с:
- Деловые Линии
- Рэйл Континент
- СДЭК
- DPD/SPSR
- CSE – Курьер Сервис Экспресс
- Dostavista
Мы работаем преимущественно с юридическими лицами, хотя бывают исключения.
Юридические лица:
- Оплата по безналичному расчету.
- Оплата производится по Счету либо по Счету-договору.
- С постоянными клиентами оплата производится по рамочному договору. Условия обсуждаются в частном порядке.
Физические лица:
- Оплата по безналичному расчету.
- Оплата осуществляется путем перечисления денежных средств на реквизиты, указанные в Счете.
- Вы можете осуществить перевод через мобильное приложение, через банк-клиент, либо оплатить по счету через кассу Вашего банка. Срок зачисления средств от 1 до 3 рабочих дней.
